Diode Laser Treatment Head Replacement Kit

Keep your handpiece performing at its best. Quick-connect magnetic mount treatment heads in all standard spot sizes — replace a worn crystal in under 2 minutes without tools. Available in standard and ice cooling versions.

Easy Self-Replacement — No Technician Needed

Our quick-connect magnetic mount design means you can swap treatment heads yourself in under 2 minutes. No technician, no service call, no shipping your handpiece anywhere. Each kit includes the alignment tool and step-by-step instructions.

Know When to Replace

Replace when you notice: (1) visible scratches or chips on the crystal, (2) reduced energy output on your power meter, (3) uneven spot pattern during test firing, (4) cooling efficiency drop on ice models. Proactive replacement prevents treatment quality issues.

Kit Contents — Everything You Need

Each kit includes: treatment head with pre-installed sapphire crystal, mounting screws, alignment tool, and installation guide. No additional tools or parts required for a complete swap.

Keep Multiple Spot Sizes on Hand

Smart clinics stock both 12×12mm (precision work) and 15×15mm or 15×25mm (large area coverage). Having both spot sizes ready means you never slow down a treatment session to swap adapters.

How do I know which spot size treatment head to order?

Check your current treatment head — the spot size is usually engraved on the sapphire crystal housing or listed in your machine manual. Standard sizes: 12×12mm (precision work), 15×15mm (general use), 15×25mm (large area, high-power machines). If unsure, send us a photo of your current treatment head and we will identify it.

Can I replace the treatment head myself?

Yes — our quick-connect magnetic mount design enables tool-free replacement in under 2 minutes. Each kit includes an alignment tool and step-by-step instructions. Simply detach the old head, align the new one using the guide pins, and the magnetic mount locks it in place. No technician or service call needed.

Do I need a different treatment head for ice cooling?

Yes. Ice cooling handpieces use a treatment head with integrated TEC cooling module and thermal interface. ICE treatment heads are not interchangeable with standard heads. When ordering, specify “ICE” for ice cooling handpieces or “STD” for standard air/water-cooled handpieces.